Specifies the network address used by the network adapter. Requires a setting of either Half or Full. Specifies the number of the PCI bus on which the network adapter is located. The BusNum keyword value, which represents the PCI bus number in which the adapter is located, is a decimal number ranging from 0 to Alternatively, use Broadcom Advanced Control Suite 2 see Broadcom Advanced Control Suite 2 to view the bus number, function port number, and device number assigned to each adapter Windows users only.
|Date Added:||15 March 2009|
|File Size:||20.3 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
When running Setup for Microsoft Network Client v3. The LineSpeed keyword is used to force the speed of the network connection. The NodeAddress keyword specifies the network address used by the adapter.
If the driver fails to load, an initialization fail message is displayed. Specifies the PCI function or port number assigned to the network controller.
If a multicast address or a broadcast address is specified, the adapter uses the default MAC address. Requires a setting of either Half or Full. Requires the decimal number 10, or Type expand -r ncadmin.
These keywords are used concurrently and are included for manufacturing purposes. Create the appropriate Autoexec.
Requires a decimal number having a value ranging from 0 to 7. For the sake of simplicity, the driver performs auto-negotiation when broadcpm line speed is set to a value of A PCI device scan utility is needed to find this information. Specifies the number of the PCI bus on which the network adapter is located.
This file is located on the installation CD. Do not use them unless you are familiar with how to configure PCI devices. The LineSpeed keyword requires a decimal number and of either 10,or Insert the disk that contains the B These keywords are listed below:.
Broadcom NetXtreme Ethernet Controller Driver 15.0.1 for DOS NDIS2
Specifies the network address used by the network adapter. When the Duplex keyword is used, the LineSpeed keyword must also be used.
These files are located on the installation CD. OS2 files, and then click OK.
When this keyword is used, the LineSpeed keyword must also be used. The DevNum keyword value, which represents the assigned device number, is a decimal number ranging from 0 to After creating the startup disk, follow the instructions in Broadom the Startup Disk.
Do not use these keywords unless you know how to configure PCI devices. Using Keywords for the B Follow the on-screen instructions to make the network startup disk choose NE Compatible from the list of adapters. Open a command ethefnet window and change the directory sthernet C: Check for references to C: If 2 or more adapters that have a good link have the same Device ID, the NDIS2 driver software loads on the adapter that is located in the slot having the lowest bus number.
Windows NT Server 4.
Broadcom NetXtreme Ethernet Controller Driver for DOS NDIS2 Driver – TechSpot
Specifies the duplex mode of the network adapter. These keywords, BusNumDevNumand FuncNum or PortNumare needed when multiple adapters are installed in the system and when a specific controller must be loaded in a certain order. The FuncNum keyword value, which represents the function port number of a multiport adapter, is a decimal number, with 0 representing the first port, and 1 representing the second port.